RISER KITS

READY-TO-USE WAX COATINGS FOR RESIDENTIAL RISERS

Trenton Riser Kits combine the durability and protection that Trenton Wax-Tape® wrap is famous for, and make it even easier to use. The kits include customsized sections of Trenton Wax-Tape® wrap, precut and ready to use out of the box. The kits also contain a corresponding amount of Trenton’s versatile Temcoat™ 3000 Wax-Tape® Primer.

Trenton Wax-Tape® wrap is an ideal corrosionpreventative coating for residential risers.

• Extremely durable and long-lasting protection
• UV, moisture, salt, acid-resistant-coatings
• Easy to apply
• Removable for inspection or repair
• Compatible with extended inspection cycles

Features

• UV-resistant
• Moisture-resistant
• Easy to apply
• Strong Performance

Typical Applications

• Residential risers
• Meter sets
• CAD welds and other CP connections
• Small fixtures and fittings
• LNG and Propane connections

Riser Kit Application Producedures

1. Dig minimum 3″ deep soil surrounding the riser.
2. Wire brush so that the surface is free from loose rust, dirt and old, loose coating.
3. Wipe the area clean. Surface should be wiped as dry as possible.
4. Hand apply the primer. Firmly rub and press the primer onto the surface to displace the moisture and ensure that the primer is adhering to the metal surface.
5. Pay special attention to applying Primer in and around all angles and threads.
6. Wipe hands clean of Primer. Remove pad of Trenton Wax-Tape wrap from package and remove the backing paper.
7. Starting at the bottom of the riser, firmly press the Wax-Tape wrap around the pipe with the seam facing toward the back of the pipe. When using additional pads, use a minimum of 1″ overlap.
8. Press the pad of Wax-Tape wrap firmly to the pipe. Press to eliminate any bubbles and smooth the lap seams and endseams to ensure that they are selaed.
9. Inspect your work. Make sure all diesired areas to be coated are completely covered. Remove and re-apply, if needed.

Packaging

Trenton Riser Kits include 50 Trenton Wax-Tape® #2A wrap (aluminum color) 6″ x 6″ pads. Other, custom sizes are available upon request. Contact your Trenton representative to discuss your specific needs.

Specifications

Wax-Tape® #2A Wrap